Recent questions tagged gate

0 votes

0 answers

If the drive efficiency is 80%, the torque required on the input shaft to create 1000N output thrust is

asked Sep 5, 2017 in MD by chandu (215k points)

0 votes

0 answers

If the ratio of speed reduction in this unit is 10:1 the efficiency is about

asked Sep 5, 2017 in MD by chandu (215k points)

0 votes

0 answers

Tooth interference in an external involute spur gear pair can be reduced by

asked Sep 5, 2017 in MD by chandu (215k points)

0 votes

0 answers

The torque transmitted by gear is

asked Sep 5, 2017 in MD by chandu (215k points)

0 votes

0 answers

The minimum number of teeth on the pinion to operate without interference

asked Sep 5, 2017 in MD by chandu (215k points)

0 votes

0 answers

Large speed reductions (greater than 20) in one stage of a gear train are possible through

asked Sep 5, 2017 in MD by chandu (215k points)

0 votes

0 answers

The gearing arrangement suitable for this application is

asked Sep 5, 2017 in MD by chandu (215k points)

0 votes

0 answers

To make a worm drive reversible, it is necessary to increase

asked Sep 5, 2017 in MD by chandu (215k points)

0 votes

0 answers

In spur gears, the circle on which the involute is generated in called the

asked Sep 5, 2017 in MD by chandu (215k points)

0 votes

0 answers

Match the following:

asked Sep 5, 2017 in MD by chandu (215k points)

0 votes

0 answers

The gears intersect common tangent to the base circles with in the points of tangency. (a) True (b) False

asked Sep 5, 2017 in MD by chandu (215k points)

0 votes

0 answers

For a pinion of 15 teeth, under cutting ---------------- (increases / decreases)

asked Sep 5, 2017 in MD by chandu (215k points)

0 votes

0 answers

Modern gear tooth profile is given involute shape because

asked Sep 5, 2017 in MD by chandu (215k points)

0 votes

0 answers

Minimum number of teeth of pinion of avoid interference depends upon

asked Sep 5, 2017 in MD by chandu (215k points)

0 votes

0 answers

Neglecting friction due to clamping force, maximum shear stress in a bolt is _____________ MPa.

asked Sep 4, 2017 in MD by chandu (215k points)

0 votes

0 answers

The value of maximum shear stress developed in the bolt P(in MPa) is _________

asked Sep 4, 2017 in MD by chandu (215k points)

0 votes

0 answers

The magnitude of the load on the worst loaded rivet (in N) is ____

asked Sep 4, 2017 in MD by chandu (215k points)

0 votes

0 answers

The effective stiffness (in MN/m) of the bolt in the clamped zone is _________

asked Sep 4, 2017 in MD by chandu (215k points)

0 votes

0 answers

The minimum metric specification required for the bolt is

asked Sep 4, 2017 in MD by chandu (215k points)

0 votes

0 answers

If the rivets are to be designed to avoid crushing failure, the maximum permissible load P in kN is

asked Sep 4, 2017 in MD by chandu (215k points)

Page:

« prev
1
...
36
37
38
39
40
41
42
43
44
...
102
next »

...