Recent questions tagged gate

0 votes

0 answers

In terms of theoretical stress concentration factor (kt) and figure stress concentration factor (kf)

asked Sep 4, 2017 in MD by chandu (215k points)

0 votes

0 answers

This shaft will be designed for

asked Sep 4, 2017 in MD by chandu (215k points)

0 votes

0 answers

Which of the following torque fluctuations represent the most critical situation according to Soderberg criterion?

asked Sep 4, 2017 in MD by chandu (215k points)

0 votes

0 answers

Fatigue strength of rod subjected to cyclic axial force is less than that of a rotating beam of the same dimensions

asked Sep 4, 2017 in MD by chandu (215k points)

0 votes

0 answers

In a shaft which transverse hole, as the hold to the shaft diameter ratio ____________ increases/ decreases)

asked Sep 4, 2017 in MD by chandu (215k points)

0 votes

0 answers

The process of shot peening increases the fatigue life of steel springs mainly because if results in

asked Sep 4, 2017 in MD by chandu (215k points)

0 votes

0 answers

Stress concentration in a machine component of a ductile material is not so harmful as it is in a brittle material

asked Sep 4, 2017 in MD by chandu (215k points)

0 votes

0 answers

Which one of the following relations is TRUE?

asked Sep 3, 2017 in MD by chandu (215k points)

0 votes

0 answers

The factor of safety as per Tresca’s maximum shear stress theory is

asked Sep 3, 2017 in MD by chandu (215k points)

0 votes

0 answers

The factor of safety using maximum distortion energy (Von-Mises) theory is ___

asked Sep 3, 2017 in MD by chandu (215k points)

0 votes

0 answers

From the standpoint of distortion energy (Von-Mises) criterion, which one of the following statements is tyre?

asked Sep 3, 2017 in MD by chandu (215k points)

0 votes

0 answers

The maximum tensile stress (in MPa) at the point is

asked Sep 3, 2017 in MD by chandu (215k points)

0 votes

0 answers

The minimum allowable design diameter in mm is

asked Sep 3, 2017 in MD by chandu (215k points)

0 votes

0 answers

The homogeneous state of stress for a metal part undergoing plastic deformation is

asked Sep 3, 2017 in MD by chandu (215k points)

0 votes

0 answers

The maximum working stress according to distortion energy theory is

asked Sep 3, 2017 in MD by chandu (215k points)

0 votes

0 answers

The most critical point from the strength point of view is

asked Sep 3, 2017 in MD by chandu (215k points)

0 votes

0 answers

According to Von mises criterion, the shear yield stress (in MPa) of the materials is ________

asked Sep 3, 2017 in MD by chandu (215k points)

0 votes

0 answers

Which one of the following is NOT correct.

asked Sep 3, 2017 in MD by chandu (215k points)

0 votes

0 answers

Match the following criteria of material failure, under biaxial stresses s1 and s2 and yield stress sy

asked Sep 3, 2017 in MD by chandu (215k points)

0 votes

1 answer

Which theory of failure will you use for aluminium components under steady loading is

asked Sep 3, 2017 in MD by chandu (215k points)

Page:

« prev
1
...
38
39
40
41
42
43
44
45
46
...
102
next »

...