0 votes
80 views
asked in production by (215k points)
Orthogonal turning is performed on a cylindrical work piece with shear strength of 250Mpa. The following conditions are used: cutting velocity is 180m/min, feed is 0.2mm/rev, depth of cut is 3mm, chip thickness ratio is 0.5. the orthogonal rake angle is 7deg. Apply Merchants theory for analysis.

The shear plane angle (in degrees) and the shear force respectively are

(a) 22.65 ; 150N             (b) 22.65; 320N

(c) 28; 400N                   (d) 28; 320N

 

The cutting and frictional forces respectively are

(a) 568N ; 387N              (b) 565N ; 381N

(c) 202N ; 120N              (d) 202N ; 356N

Please log in or register to answer this question.

Welcome to Q&A discussion forum, where you can ask questions and receive answers from other members of the community.

10.4k questions

274 answers

26 comments

15.3k users

...