Match List – I (Forging operations) with List – II (Descriptions) and select the correct answer
List – I List –II
A. Flattening 1. Thickness is reduced continuously at different sections
along length
B. Drawing 2. Metal is displaced away from centre reducing thickness in
middle and increasing length
C. Fullering 3.Rod is pulled through a die
D. Wire drawing 4. Pressing a work piece between two flat dies
Codes: A B C D
(a) 3 2 1 4
(b) 4 1 2 3
(c) 3 1 2 4
(d) 4 2 1 3